Siser EasySubli Vinyl Application Instructions
Application Instructions
- For Use On 100% cotton, Poly/Cotton blends, 100% polyester.
- Print directly on to the EasySubli vinyl.
- Allow the vinyl to dry under a hot heat press plate for 1 minute prior to pressing at 311°F!
- Cut and Weed the excess material.
- Apply the EasySubli Mask to printed image and use squeegee to smooth the mask over the vinyl.
- Pull the mask and vinyl apart so the vinyl is adhered to the mask.
- Place the mask with vinyl on garment.
- Cover the print with a non stick sheet.
- Apply design at 311°F/155°C.
- Use medium pressure for 15 seconds.
- Peel warm.
Washing Instructions
- Wait 24 hours before first wash.
- Washing resistance up to 60˚C, best inside out
- Do not use bleach or other aggressive chemical agents
- Not suitable for dry clean
- Suitable for tumble dryer, synthetic cycle