ALUMINUM SQUARE GOLD FRIDGE MAGNET

Texprint Sublimation Paper on Sublimation Magnets

Application Instructions

1. Set temperature to 380 degrees Fahrenheit.
2. Set timer to 120 seconds.
3. Set Pressure at medium and a place a pressing pillow on the bottom pad of the heat press.
4. Print a mirror image onto Texprint Paper. Image should be larger than the substrate.
5. Remove protective coating from magnet (if applicable).
6. Place the substrate face down on the transfer paper and tape the paper to the substrate using transfer release tape.
7. Place substrate face down on the pressing pillow with the magnet side up.
8. Cover with a non stick sheet.
9. Press at 380 degrees F for 120 seconds with medium pressure.
10. Remove immediately from press once finished and peel hot.