As Low As
$1.09
1-11
$1.29
12+
$1.09
In Stock - Available for immediate delivery
Features
| SKU | SB-S-092A |
|---|---|
| Brand | Best Sub |
| Finish | Matte |
| Substrate Color | Clear/Glass |
| Mirror Image | No |
| Protective Film | No |
Texprint Sublimation Paper on a Shot Glass with a 3D Vacuum Heat Press
Application Instructions
- Turn the 3D Vacuum Heat press on.
- Set the heating button so both the top and bottom heating lights are on.
- Set the Temperature to 200 degrees C and time to 13 minutes.
- Print a mirror image onto Texprint Paper.
- Trim the edges of the image and wrap around shot glass.
- Attach the image to shot glass using transfer release tape.
- Place the shot glasses within the mold and cover with the glass lid.
- Attach the rubber tube that is connected to the bottom of the 3D Vacuum Press to the white tube sticking out of the mold.
- Press vacuum button.
- Press the time button.
- Remove immediately once finished and peel hot. Use caution as shot glass will be very hot.
Texprint Sublimation Paper on Glass Drinkware with a Mug Press
Application Instructions
- Set temperature to 380-400 degrees Fahrenheit.
- Set timer to 120 seconds.
- Set Pressure at heavy.
- Print a mirror image onto Texprint Paper.
- Trim the edges of the image and wrap around the item.
- Attach the image to item using transfer release tape.
- Press at 380 degrees F for 120 seconds with heavy pressure.
- Remove immediately from press once finished and peel hot.
Write Your Own Review