CADflex™ is a heat transfer vinyl with a non-stick carrier that makes it perfect for stocking up and storing athletic names, numbers and team logos. Prepare your team sets ahead of time by cutting multiple numbers and team logos and store them for quick use. CADflex™ is perfect for all sports including soccer, football, baseball, softball and little league. The nonstick backing allows for easy weeding of your lettering and numbers. Looking for an inexpensive way to add player numbers to leather shoes? CADflex™ is the answer! By using a shoe platen on your heat press you can easily apply player numbers and give your team's shoes a look that stands out!
| Brand | Siser |
|---|---|
| SKU | VN-CF-Y-20 |
| Vinyl Application | Heat Applied |
| Finish | Matte |
| Transfer Vinyl Max Colors | Layerable |
| CPSIA Certified | No |
| Home Iron Compatible | Yes |
| Mirror Image | Yes |
| Transfer Vinyl Ideal Applications | 100% Cotton, Cotton/Poly Blends, Leather, Sublimated Polyester, 100% Polyester |
| Vinyl Thickness | 6.8 mils |
- 2 colors available
- Width: 19.5" +/- may vary in size
- Length: By the yard.
- Suitable 100% cotton, 100% uncoated polyester, poly/cotton blends, Leather, Sublimated polyester
- Thickness : 175 microns (USA : 6.8 mil)
- Carrier: Static backing.
- Do not dry clean.
- Machine wash WARM / mild detergent.
- Dry at normal setting.
- No chlorine bleach.
- Wait 24 hours before first wash.
- Turn garment inside out.
Siser CADflex Application Instructions
Application Instructions
- 100% cotton, Poly/cotton blends, 100% polyester, Leather.
- Cut in reverse
- Weed excess material
- Preheat garment for 2-3 seconds
- Apply design at 305°F/150°C
- Use medium pressure for 10-15 seconds
- Peel carrier hot or cold
- Wait 24 hours before first wash.
Siser CADflex Home Iron Application Instructions
Application Instructions
- 100% cotton, Poly/cotton blends, 100% polyester
- Set iron dial between Cotton and Linen
- Cover design with Kraft paper or non-stick cover sheet
- Place on flat, hard surface (ironing board not recommended)
- Press iron with medium/firm pressure (do not slide iron)
- Press each section of design for 10-15 seconds
- If areas of design lift after application, replace cover sheet and re-press for 10 seconds
- Peel carrier hot or cold
- Wait 24 hours before first wash.
Siser Cadflex Vinyl for Brother Cutters
Cutter Settings
- Blade: 2
- Cut Speed: 1
- Cut Pressure: 1
Siser Cadflex Vinyl for Cricut Cutters
Cutter Settings
- Blade: Standard
- Setting: Iron-on
Siser CADflex for Galaxy Cutters
Cutter Settings
- Blade: 45°/60°
- Gram Force: 65-70
- Speed: 300mm/s
- *Blade Advancing Varies
Siser Cadflex Vinyl for GCC Cutters
Cutter Settings
- Blade: 45°
- Force: 80g-90g
- Speed: 25-50 cm/s
Siser Cadflex Vinyl for Roland Cutters
Cutter Settings
- Blade: 45°
- Force: 80g-90g
- Speed: 25-50 cm/s
Siser Cadflex Vinyl for Silhouette Cutters
Cutter Settings
- Blade: Standard, 3
- Setting: Heat Transfer Material (Smooth)
- Speed: 8
- Thickness: 6