Starting at $1,064.21
Black Friday Sale - 10% Off
59" EasyWeed™ is ideal for large vinyl production. Sold in 50 yard rolls.
Features
| Brand | Siser |
|---|---|
| SKU | VN-EW-Y-59 |
| Vinyl Application | Heat Applied |
| Transfer Vinyl Type | EasyWeed |
| Finish | Semi Gloss |
| Transfer Vinyl Max Colors | Layerable |
| CPSIA Certified | Yes |
| Home Iron Compatible | Yes |
| Mirror Image | Yes |
| Transfer Vinyl Ideal Applications | 100% Cotton, Cotton/Poly Blends, Leather, 100% Polyester |
| Vinyl Thickness | 3.5 mils |
Features
- 40 colors available
- Width: 58" +/-
- Length: 50 yd roll
- Suitable for Cotton, polyester, poly/cotton blends, and leather
- Thickness : 90 microns (USA : 3.5 mil)
- Carrier: Pressure sensitive backing.
- Do not dry clean.
- Machine wash WARM / mild detergent.
- Dry at normal setting.
- No chlorine bleach.
- Wait 24 hours before first wash.
Siser EasyWeed Application Instructions
Application Instructions
- 100% cotton, Poly/cotton blends, 100% polyester, Leather.
- Cut in reverse
- Weed excess material
- Preheat garment for 2-3 seconds
- Apply design at 305°F/150°C
- Use medium pressure for 10-15 seconds
- Peel carrier hot or cold
- Wait 24 hours before first wash.
Siser EasyWeed Home Iron Application Instructions
Application Instructions
- 100% cotton, Poly/cotton blends, 100% polyester
- Set iron dial between Cotton and Linen
- Cover design with Kraft paper or non-stick cover sheet
- Place on flat, hard surface (ironing board not recommended)
- Press iron with medium/firm pressure (do not slide iron)
- Press each section of design for 10-15 seconds
- If areas of design lift after application, replace cover sheet and re-press for 5-10 seconds
- Peel carrier hot or cold
- Wait 24 hours before first wash.
Siser EasyWeed Vinyl for GCC Cutters
Cutter Settings
- Blade: 45˚
- Gram Force: 80
- Offset: .250
- Speed: 30 cm/s
Siser EasyWeed Vinyl for Cricut Cutters
Cutter Settings
- Blade: Standard
- Setting: Iron-on
Siser EasyWeed Vinyl for Roland Cutters
Cutter Settings
- Blade: 45°
- Gram Force: 80-90
- Offset: .250
- Speed: 25-50 cm/s
Siser EasyWeed Vinyl for Galaxy Cutters
Cutter Settings
- Blade: 45°/60°
- Gram Force: 60-65
- Speed: 300mm/s
- *Blade Advancing Varies
Siser EasyWeed Vinyl for Silhouette Cutters
Cutter Settings
- Blade: Standard, 3
- Setting: Heat Transfer Material (smooth)
- Speed: 8
- Thickness: 6
Siser EasyWeed Vinyl for Brother Cutters
Cutter Settings
- Blade: 2
- Cut Speed: 1
- Cut Pressure: 1
Siser EasyWeed Vinyl for Graphtec Cutters
Cutter Settings
- Blade: 45°
- Gram Force: 8-9
- Tool: CB09U+0
- Speed: 30 cm/s
Write Your Own Review