Siser EasyWeed in now available in machine cut sheets! The actual sheet size is 12" x 14.5" with an acceptable variance range +/- 1/4" on either dimension. Siser EasyWeed is a polyurethane, ready-to-cut heat transfer vinyl designed for custom garment decoration. Siser EasyWeed is in a league of its own because of it's sticky pressure sensitive carrier which allows you to cut and weed small letters and fine designs very easily. Much thinner than other film materials, Siser EasyWeed is perfect for single color or multi-layered applications. Siser EasyWeed also offers excellent durability, even after repeated washings. Available in 22 popular colors shown below.
| Brand | Siser |
|---|---|
| SKU | VN-EW-S-15 |
| Vinyl Application | Heat Applied |
| Transfer Vinyl Type | EasyWeed |
| Finish | Semi Gloss |
| Transfer Vinyl Max Colors | Layerable |
| CPSIA Certified | Yes |
| Home Iron Compatible | Yes |
| Mirror Image | Yes |
| Transfer Vinyl Ideal Applications | 100% Cotton, Cotton/Poly Blends, Leather, 100% Polyester |
| Vinyl Thickness | 3.5 mils |
- 19 colors available
- Width: 12"x14.5" +/- (may vary in size)
- Length: By the sheet.
- Suitable for Cotton, polyester, poly/cotton blends, and leather
- Thickness : 90 microns (USA : 3.5 mil)
- Carrier: Pressure sensitive backing.
- Do not dry clean.
- Machine wash WARM / mild detergent.
- Dry at normal setting.
- No chlorine bleach.
- Wait 24 hours before first wash.
- Turn garment inside out
Siser EasyWeed Application Instructions
Application Instructions
- 100% cotton, Poly/cotton blends, 100% polyester, Leather.
- Cut in reverse
- Weed excess material
- Preheat garment for 2-3 seconds
- Apply design at 305°F/150°C
- Use medium pressure for 10-15 seconds
- Peel carrier hot or cold
- Wait 24 hours before first wash.
Siser EasyWeed Home Iron Application Instructions
Application Instructions
- 100% cotton, Poly/cotton blends, 100% polyester
- Set iron dial between Cotton and Linen
- Cover design with Kraft paper or non-stick cover sheet
- Place on flat, hard surface (ironing board not recommended)
- Press iron with medium/firm pressure (do not slide iron)
- Press each section of design for 10-15 seconds
- If areas of design lift after application, replace cover sheet and re-press for 5-10 seconds
- Peel carrier hot or cold
- Wait 24 hours before first wash.
Siser EasyWeed Vinyl for GCC Cutters
Cutter Settings
- Blade: 45˚
- Gram Force: 80
- Offset: .250
- Speed: 30 cm/s
Siser EasyWeed Vinyl for Cricut Cutters
Cutter Settings
- Blade: Standard
- Setting: Iron-on
Siser EasyWeed Vinyl for Roland Cutters
Cutter Settings
- Blade: 45°
- Gram Force: 80-90
- Offset: .250
- Speed: 25-50 cm/s
Siser EasyWeed Vinyl for Galaxy Cutters
Cutter Settings
- Blade: 45°/60°
- Gram Force: 60-65
- Speed: 300mm/s
- *Blade Advancing Varies
Siser EasyWeed Vinyl for Silhouette Cutters
Cutter Settings
- Blade: Standard, 3
- Setting: Heat Transfer Material (smooth)
- Speed: 8
- Thickness: 6
Siser EasyWeed Vinyl for Brother Cutters
Cutter Settings
- Blade: 2
- Cut Speed: 1
- Cut Pressure: 1
Siser EasyWeed Vinyl for Graphtec Cutters
Cutter Settings
- Blade: 45°
- Gram Force: 8-9
- Tool: CB09U+0
- Speed: 30 cm/s