Black Friday Sale - 10% Off
Price Per Yard (per color)
1-4
$16.75
5-9
$14.02
10-49
$13.07
50+
$11.68
Features
Brand | Siser |
---|---|
SKU | VN-GITD-Y-15 |
Vinyl Application | Heat Applied |
Transfer Vinyl Type | EasyWeed |
Finish | Matte |
Transfer Vinyl Max Colors | Layerable |
CPSIA Certified | Yes |
Home Iron Compatible | Yes |
Mirror Image | Yes |
Transfer Vinyl Ideal Applications | 100% Cotton, Cotton/Poly Blends, Leather, 100% Polyester |
Vinyl Thickness | 3.5 mils |
Features
- 1 color available
- Width: 14.5" +/- (may vary in size)
- Length: By the yard.
- Suitable for Cotton, uncoated polyester, poly/cotton blends, and leather)
- Thickness : 90 microns (USA : 3.5 mil)
- Carrier: Pressure sensitive backing.
- Do not dry clean.
- Machine wash COLD / mild detergent.
- Dry at normal setting.
- No chlorine bleach.
- Turn garment inside out.
- Wait 24 hours before first wash.
Siser EasyWeed Glow Application Instructions
Application Instructions
- 100% cotton, Poly/cotton blends, 100% polyester, Leather
- Cut in reverse
- Weed excess material
- Preheat garment for 2-3 seconds
- Apply design at 305°F/150°C
- Use light/medium pressure for 10-15 seconds
- Peel carrier hot or cold
- Wait 24 hours before first wash.
Siser Glow Home Iron Application Instructions
Application Instructions
- 100% cotton, Poly/cotton blends, 100% polyester
- Set iron dial between Cotton and Linen
- Cover design with Kraft paper or non-stick cover sheet
- Place on flat, hard surface (ironing board not recommended)
- Press iron with medium/firm pressure (do not slide iron)
- Press each section of design for 10-15 seconds
- If areas of design lift after application, replace cover sheetand re-press for 5-10 seconds
- Peel carrier hot or cold
- Wait 24 hours before first wash.
Siser Glow Vinyl for Brother Cutters
Cutter Settings
- Blade: 2
- Cut Speed: 1
- Cut Pressure: 1
Siser Glow Vinyl for Cricut Cutters
Cutter Settings
- Blade: Standard
- Setting: Paper+
Siser EasyPSV Glow for Galaxy Cutters
Cutter Settings
- Blade: 45°/60°
- Gram Force: 80-85
- Speed: 180mm/s
- *Blade Advancing Varies
Siser Glow Vinyl for GCC Cutters
Cutter Settings
- Blade: 45°
- Gram Force: 80-90
- Offset: .250
- Speed: 30 cm/s
Siser Glow Vinyl for Graphtec Cutters
Cutter Settings
- Blade: 45°
- Gram Force: 9-10
- Tool: CB09U+0
- Speed: 30 cm/s
Siser Glow Vinyl for Roland Cutters
Cutter Settings
- Blade: 45°
- Gram Force: 80-90
- Offset: .250
- Speed: 30 cm/s
Siser Glow Vinyl for Silhouette Cutters
Cutter Settings
- Blade: Standard, 3
- Setting: Heat Transfer Material (Smooth)
- Speed: 8
- Thickness: 5
Write Your Own Review