Black Friday Sale - 10% Off
Price Per Yard (per color)
1-4
$10.99
5-9
$9.40
10-49
$8.99
50+
$7.63
Features
Brand | Siser |
---|---|
SKU | VN-MT-Y-20 |
Vinyl Application | Heat Applied |
Transfer Vinyl Type | Metallic |
Finish | Metallic |
Transfer Vinyl Max Colors | Layerable |
CPSIA Certified | Yes |
Home Iron Compatible | Yes |
Mirror Image | Yes |
Transfer Vinyl Ideal Applications | 100% Cotton, Cotton/Poly Blends, 100% Polyester |
Vinyl Thickness | 3.9 mils |
Features
- 4 colors available
- Width: 19.5" +/- (may vary in size)
- Length: By the yard.
- Suitable 100% cotton, 100% uncoated polyester, poly/cotton blends,
- Thickness : 100 microns (USA : 3.9 mil)
- Carrier: Pressure sensitive backing.
- Do not dry clean.
- Machine wash COLD / mild detergent.
- Hang to dry
- No chlorine bleach.
- Wait 24 hours before first wash.
- *Metallic is a unique product - cracking and delamination may occur after washing. Results are not predictable.
Siser Metal Application Instructions
Application Instructions
- 100% cotton, Poly/cotton blends, 100% polyester, Leather, Sublimated polyester
- Cut in reverse
- Weed excess material
- Preheat garment for 2-3 seconds
- Apply design at 305°F/150°C
- Use medium pressure for 10-15 seconds
- Peel carrier cold
- Wait 24 hours before first wash
Siser Metal Home Iron Application Instructions
Application Instructions
- 100% cotton, Poly/cotton blends, 100% polyester
- Set iron dial between Cotton and Linen
- Cover design with Kraft paper or non-stick cover sheet
- Place on flat, hard surface (ironing board not recommended)
- Press iron with medium/firm pressure (do not slide iron)
- Press each section of design for 10-15 seconds
- If areas of design lift after application, replace cover sheetand re-press for 5-10 seconds
- Peel carrier hot or cold
- Wait 24 hours before first wash.
Siser Metallic Vinyl for Brother Cutters
Cutter Settings
- Blade: 2
- Cut Speed: 1
- Cut Pressure: 1
Siser Metallic Vinyl for Cricut Cutters
Cutter Settings
- Blade: Standard
- Setting: Iron-on
Siser Metallic for Galaxy Cutters
Cutter Settings
- Blade: 45°/60°
- Gram Force: 100-110
- Speed: 300mm/s
- *Blade Advancing Varies
Siser Metallic Vinyl for GCC Cutters
Cutter Settings
- Blade: 45˚
- Gram Force: 180-190
- Offset: .250
- Speed: 30 cm/s
Siser Metallic Vinyl for Graphtec Cutters
Cutter Settings
- Blade: 45°
- Gram Force: 8-9
- Tool: CB09U+0
- Speed: 30 cm/s
Siser Metallic Vinyl for Roland Cutters
Cutter Settings
- Blade: 45°
- Force: 80g-90g
- Offset: .250 cm/s
- Speed: 30-50 cm/s
Siser Metallic Vinyl for Scan N Cut Cutters
Cutter Settings
- Blade: Standard, 2
- Cut Speed: 1
- Cut Pressure: 3
Siser Metallic Vinyl for Silhouette Cutters
Cutter Settings
- Blade: Standard, 2
- Material: Heat Transfer (Smooth)
- Speed: 8
- Force: 6
Write Your Own Review